LAN settings

WLAN active/inactive

Enables/disables wireless LAN.

Wireless LAN setup

Selects the setup method for wireless LAN connection.

• Easy wireless connect

  Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure.

• Manual connect

  Select when you perform settings for wireless LAN manually using the operation panel of the printer.

• WPS (Push button method)

  Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup.

• Other setup

  • Advanced setup

    Select when you perform settings for wireless LAN manually. You can specify multiple WEP keys.

  • WPS (PIN code method)

    Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.

WLAN setting list

The list of wireless LAN settings of this printer is displayed on the touch screen.

Select Print details and then Yes to print the list.

• Printing Network Settings

Important

• The network settings printout contains important information about your network. Handle it with care.

The following setting items are displayed. (Some setting items are not displayed depending on the printer settings.)

("XX" represents alphanumeric characters.)

Wireless Direct active/inactive

Enables/disables Wireless Direct.

Update SSID/password

Selecting Yes updates the identifier (SSID) and password for Wireless Direct.

Change device name

Changes the printer's name displayed on a Wi-Fi Direct compatible device.

Connection request confirmation

Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is connecting the printer.

Wireless Direct setting list

The list of Wireless Direct settings of this printer is displayed on the touch screen.

Select Print details and then Yes to print the list.

• Printing Network Settings

Important

• The network settings printout contains important information about your network. Handle it with care.

The following setting items are displayed. (Some setting items are not displayed depending on the printer settings.)

("XX" represents alphanumeric characters.)

Set printer name

Specifies the printer name. You can use up to 15 characters for the name.

Note

• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.

TCP/IP settings

Performs IPv4 or IPv6 setting.

WSD setting

Setting items when you use WSD (one of the network protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista).

• Enable/disable WSD

  Selects whether WSD is enabled or disabled.

  Note

  • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 8.1, Windows 8, Windows 7, and Windows Vista.

• Optimize inbound WSD

  Selecting Enable allows you to receive the WSD printing data faster.

• WSD scan from this device

  Selecting Enable allows you to transfer the scanned data to the computer using WSD.

• Timeout setting

  Specifies the timeout length.

Bonjour settings

Setting items for LAN using Bonjour for Mac OS.

• Enable/disable Bonjour

  Selecting Enable allows you to use Bonjour to perform the network settings.

• Service name

  Specifies the Bonjour service name. You can use up to 48 characters for the name.

  Note

  • You cannot use the same service name as that already used for other LAN connected devices.

LPR protocol setting

Enables/disables the LPR setting.

RAW protocol

Enables/disables RAW printing.

LLMNR

Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the printer to detect printer's IP address from the printer name without a DNS server.

PictBridge communication

Setting items for printing from a PictBridge (Wireless LAN) compliant device.

• Enable/disable communication

  Selecting Enable allows you to print from a PictBridge (Wireless LAN) compliant device.

• Timeout setting

  Specifies the timeout length.

IPsec settings

Selecting Active allows you to specify the IPsec security.